Full automatic wire mesh welding machine with line and cross wires from coils.
Characteristics:
- power: 11 x 100 kVA
- drawing motors: 85 kW
- el. voltage: 3 x 400 VAC
- controlled by: PC
- wire mesh dimension: 6000 x 2000 mm
- wire diameter: 4-10 mm
- distance between line wires 100 and 150 mm
- distance between cross wires from 50 to 250 mm
- working speed 120 cross wires/min
- machine dimension: 45 x 7 x 4 mm
- machine is operated by two workers
Machine is designed for making rolled welded mesh, width from 2000 to 2400 mm, with distance between line wires from 100 to 200 mm, with distance of cross wire from 50 to 250 mm and wire diameter from 3 to 5 mm.
Technical characteristics of machine:
- installed power:
* transformers: from 7 to 12 x 30 kVA
* driving motors: from 25 to 40 kW
- el. voltage: 3 x 400 VAC, 50 Hz
- controlled by: PC
- machine dimensions: 30000x6000x2400 mm
- diameter of wire: 3 to 5 mm
- mesh width: from 2000 to 2400 mm
- mesh length: from 20 to 50 m in the roll
- distance between line wires: from 100 to 200 mm
- distance between cross wires: from 50 to 250 mm
- welding speed: 60-80 cross wires/min
Wire mesh welding machine, line and cross wires from bars.
Used for wire mesh welding, with distance between line wires 50 and 150 mm, distance between cross wires from 20 to 150 mm and wire diameter from 2 to 5 mm.
Characteristics:
- power: 8 x 15 kVA
- el. voltage: 3 x 400 VAC
- controlled by: PC
- wire mesh dimension: 2000 x 1000 mm
- one wire mesh welding time: 30 s
- machine dimension: 7000 x 1500 x 1800 mm
- machine is operated by one worker
Wire mesh welding machine, line wires from bars, cross wire from coil, with turner.
Used for wire mesh welding, with distance between line wires 100 and 150 mm, distance between cross wires from 50 to 250 mm and wire diameter from 4 to 10 mm.
Characteristics:
- power: 11 x 75 kVA
- drawing motors: 22 kW
- el. voltage: 3 x 400 VAC
- controlled by: PC
- wire mesh dimension: 6050 x 2150 mm
-wire diameter: 4-10 mm
-between line wires 100 and 150 mm
-distance between cross wires from 50 to 250 mm
- one wire mesh welding time: 40 sec
- machine dimension: 30000 x 7000 x 2000 mm
- machine is operated by two workers
Wire mesh welding machine, line and cross wires from bars with turner.
Used for wire mesh welding, with distance between line wires 100 and 150 mm, distance between cross wires from 50 to 250 mm and wire diameter from 4 to 10 mm.
Characteristics:
- power: 11 x 75 kVA
- drawing motors: 22 kW
- el. voltage: 3 x 400 VAC
- controlled by: PC
- wire mesh dimension: 6050 x 2150 mm
-wire diameter: 4-10 mm
-between line wires 100 and 150 mm
-distance between cross wires from 50 to 250 mm
- one wire mesh welding time: 40 sec
- machine dimension: 30000 x 4000 x 2000 mm
- machine is operated by two workers
PB-70/250-1000NC-2C
Machine is designed to produce mesh spacers with possibility to make different heights. Machine is full automatic, all the wires pulling from coils, with double welding stroke and two spacers in the same time.
Technical characteristics of machine:
* Power consumption: transformers: 4x45 kVA
El. motors: 20 kW
* Supply voltage: 3x400 VAC, 50 Hz
* Control by: PC
* Weight: 10.5 t
* Machine dimensions: 30 x 5 x 1.5/3 m
* Diameter of line wire: 3.5-5 mm
* Diameter of diagonal wire: 3.5-4 mm
* Pitch (step): 150 mm
* Height: 70-250 mm
* Length of spacer before bending: 2400 mm
* Length of spacer after bending: 2050 mm
* The possibility of switching transformers: all in the same time
* Welding speed: 30 m/min
Machine use for wire drawing (pulling wire through die or rolling cassette, in order to reduce diameter, make ribs and improve mechanical characteristics of wire).
Characteristics:
- installed power: from 120 to 240 kW
- connection voltage: 3 x 400 VAC, 50 Hz
- drawing speed: up to 10 m/s
- input wire diameter: up to 10 mm
- machine dimension:
16000 x 3000 x 1500 mm
- machine is operated by one worker
Automatic, heavy-duty, machine for processing cold-rolled or hot-rolled wire from spools.
The motorized feed system, pre- straightening unit, pooling unit with electric servo drive, straightening unit, cutting sheer with electric drive, bending with electric servo drive, collecting bench.
Technical characteristics of the machine:
Total power: 27kW
Supplying voltage: 3x400 VAC, 50 Hz
Control: PLC
Weight: 3.5 tons
Dimensions of the machine: 20x4x2.5m
(with pay-off and 6m output table)
Polling speed: 30-100m/min
Bending speed: 1000°/sec
Cutting speed: 0.3 sec
Max. size of stirrup: 800x800mm
Min. size of stirrup: 100x100mm
Wire diameter range: 6-12mm
Machine use for wire drawing (pulling wire through die or rolling cassette, in order to reduce diameter, make ribs and improve mechanical characteristics of wire).
Characteristics:
- installed power: from 50 to 140 kW
- connection voltage: 3 x 400 VAC, 50 Hz
- drawing speed: up to 10 m/s
- input wire diameter: up to 12 mm
- machine dimension:
14000 x 3000 x 1500 mm
- machine is operated by one worker
Machine is designed for lattice (truss) girder mount with heights of 90 to 200 mm, pitch 200 mm, diameter of line wires of 6 to 10 mm and a diagonal wire diameter of 4 to 6 mm.
Technical characteristics of machine:
- installed power:
* transformers: 1 x 125 kVA, 1 x 150 kVA
* driving motors: 20 kW
- supply voltage: 3 x 400 VAC, 50Hz
- controlled by: PC
- weight: 6.5 T
- machine dimensions: 30 m x 4 m x (H) 2 m (4 m loop accumulator)
- diameter of line wire: 6-10 mm
- diameter of diagonal wire: 4-6 mm
- pitch (step): 200 mm
- height: 90-200 mm
- max. length of girder: 12000 mm
- welding speed: 15 m / min (with a single stroke)
Machine used for butt welding wire on the drawing machine when
finished first coil to start second.
Characteristics:
Wire diameter------------------ up to 12 or 22 mm
Installed power---------------- 6 kVA or 15 kVA
Dimension ----------------------1000x800x1300 mm
Connection voltage------------ 3 x 400 VAC, 50 Hz
Connection cable---------------Cu 5x2.5 mm²
Wire mesh welding machine, line wires from bars, cross wire from coil, without turner.
Used for wire mesh welding, with distance between line wires 100 and 150 mm, distance between cross wires from 50 to 250 mm and wire diameter from 4 to 8 mm.
Characteristics:
- power: 11 x 75 kVA
- drawing motors: 22 kW
- el. voltage: 3 x 400 VAC
- controlled by: PC
- wire mesh dimension: 6000 x 2000 mm
-wire diameter: 4-8 mm
-between line wires 100 and 150 mm
-distance between cross wires from 50 to 250 mm
- one wire mesh welding time: 40 sec
- machine dimension: 22000 x 7000 x 2000 mm
- machine is operated by two workers
Машина за заваряване на телени мрежи, линейни проводници от пръти, напречна тел от серпентина.Използва се за заваряване на телени мрежи, с разстояние между линейни проводници 100 и 150 мм, разстояние между напречните проводници от 50 до 250 мм и диаметър на телта от 4 до 8 мм.
Характеристики:
- мощност: 11 x 75 kVA
- двигатели за теглене: 22 kW
- ел. напрежение: 3 x 400 VAC
- контролиран от: PC
- размер на телената мрежа: 6000 x 2000 мм
-диаметър на проводника: 4-8 мм
-Между линейни проводници 100 и 150 мм
-разстояние между напречните проводници от 50 до 250 мм
- време за заваряване на една телена мрежа: 40 сек - размер на машината: 22000 х 7000 х 2000 мм
- машината се управлява от двама работници
Български